21-09-2005, 09:37 PM
Om man kan kalde Speedmaster Professional for et toolwatch?
Tjaeh, NASA tog det med til månen og senere udsatte de det for følgende (det var modellen med 861 værket og testen var såvidt jeg husker i 72):
High temperature: 48 hours at 71º C followed by 30 minutes at 93º
C. This under a pressure of 0,35atm and relative humidity not over
15%.
Low temperature: Four hours at -18º C.
Temperature-pressure: 0,000001atm and temperature raised to 71º
C. Temperature then lowered to -18º C in 45 minutes and again raised
to 71º C in 45 minutes. This cycle was repeated fifteen times.
Relative humidity: 240 hours in relatuve humidity of at least 95% and
at temperatures varying between 20º C and 71º C. The steam had a pH
value of between 6,5 and 7,5.
Oxygen atmosphere: Exposure to 100% oxygen atmosphere at a pressure of
0,35atm and a temperature of 71º C for 48 hours.
Shock: Six 11 millisecond shocks of 40g each in six different
directions.
Acceleration: Linear acceleration from 1g to 7,25g within 333 seconds.
Decompression: 90 minutes in a vaccum of 0,000001atm and a temperature
of 71º C and 30 minutes in the same vaccum but at a temperature of
93ºC.
High pressure: Exposure to 1,6atm for one hour.
Vibration: Three cycles of 30 minutes (lateral, horizontal and
vertical), the frequency varying from 5 to 2000cps and back to 5cps in
15 minutes. Average acceleration per impulse 8,8g.
Acoustic noise: 130db over a frequency range from 40 to 10000Hz for 30 minutes.
Derudover blev det testet i NASAs vandtanke og vist også trykprøvet til 7ATM.
Mht. svømning og det aktuelle ur, så lad os da se på hvad Omega siger om sagen:
[url]"http://www.omega.ch/fileadmin/CustomerService/WaterResist.pdf">http://www.omega.ch/fileadmin/CustomerS ... Resist.pdf[/url]
Du kan altså sagtens svømme med det.
Mht. glas, så ville jeg også vælge akryl, det hører til det ur og så må du bare polere det lidt i ny og næ.
Tjaeh, NASA tog det med til månen og senere udsatte de det for følgende (det var modellen med 861 værket og testen var såvidt jeg husker i 72):
High temperature: 48 hours at 71º C followed by 30 minutes at 93º
C. This under a pressure of 0,35atm and relative humidity not over
15%.
Low temperature: Four hours at -18º C.
Temperature-pressure: 0,000001atm and temperature raised to 71º
C. Temperature then lowered to -18º C in 45 minutes and again raised
to 71º C in 45 minutes. This cycle was repeated fifteen times.
Relative humidity: 240 hours in relatuve humidity of at least 95% and
at temperatures varying between 20º C and 71º C. The steam had a pH
value of between 6,5 and 7,5.
Oxygen atmosphere: Exposure to 100% oxygen atmosphere at a pressure of
0,35atm and a temperature of 71º C for 48 hours.
Shock: Six 11 millisecond shocks of 40g each in six different
directions.
Acceleration: Linear acceleration from 1g to 7,25g within 333 seconds.
Decompression: 90 minutes in a vaccum of 0,000001atm and a temperature
of 71º C and 30 minutes in the same vaccum but at a temperature of
93ºC.
High pressure: Exposure to 1,6atm for one hour.
Vibration: Three cycles of 30 minutes (lateral, horizontal and
vertical), the frequency varying from 5 to 2000cps and back to 5cps in
15 minutes. Average acceleration per impulse 8,8g.
Acoustic noise: 130db over a frequency range from 40 to 10000Hz for 30 minutes.
Derudover blev det testet i NASAs vandtanke og vist også trykprøvet til 7ATM.
Mht. svømning og det aktuelle ur, så lad os da se på hvad Omega siger om sagen:
[url]"http://www.omega.ch/fileadmin/CustomerService/WaterResist.pdf">http://www.omega.ch/fileadmin/CustomerS ... Resist.pdf[/url]
Du kan altså sagtens svømme med det.
Mht. glas, så ville jeg også vælge akryl, det hører til det ur og så må du bare polere det lidt i ny og næ.
![[-]](https://urdebatten.dk/images/collapse.png)